Make your own free website on Tripod.com

SPARE TIRE SAVER
STANDARD SERIES - BLACK MAX SERIES

SPARE TIRE THEFT PROTECTION

ISUZA

HOMBRE PICKUP
1996-2004

INSTALLATION INSTRUCTIONS


STEP ONE
Lower spare tire for access to winch mechanism and winch tube.
STEP TWO
Place the U-shaped bracket over the winch tube, with the round hole in the bracket leg facing toward the right side the truck. Hold the lock bar horizontal and let the flat machined end engage the round hole in the bracket. Rotate the lock bar until the flat machined end is aligned with the flat sided hole in the opposite leg of the bracket and then pushing the end of bar through flat sided hole and letting the lock bar swing downward to a vertical position which will lock the end of the bar into the U-shaped bracket.
STEP THREE
Release and let the spare tire swing back to the horizontal position. Raise the spare tire as you guide the lower end of the lock bar into the lug hole least obstructed by the winch cable mounting plate positioned in the center of the wheel. Prevent spare tire from rotating, to insure that the lock bar remains vertical as spare tire is raised to the full up/stored position.

This Lock Is Designed To Install With The Spare Tire In The Original Factory Position, Valve Stem Down.

STANDARD SERIES LOCKING INSTRUCTIONS: The PVC bar cover/seal is designed to center and hold the lock against the tapered surface of the lug hole. Hold lock inverted with the PVC cover/seal end up. Place lock over the end of the lock bar. Slide lock upward against the tapered surface of the lug hole and rotate to engage lock mechanism with the lock bar groove.

BLACK MAX SERIES LOCKING INSTRUCTIONS: (1) Remove the key from the lock cylinder.(2) Place the Black Max lock assembly over the end of the lock bar with the bar cover/seal end up. (3)Slide the lock assembly upward until the cover/seal makes contact with the tapered surface of the lug hole. (4)Press in on the "Push To Lock" button with the lock assembly still against the surface of the wheel, to engage the deadbolt lock mechanism with the groove in the locking bar.

RECORD KEY CODE NUMBER FOR FUTURE REERENCE


Lubricate Grease Fitting Once a Year To Validate LIMITED LIFETIME CORROSION WARRANTY
DO NOT Use Lithium Base Lubricants


UNITED STATES PATENTS
4794771 - D399122 - 6505488

Back||Main Page

800/843-5701

www.sparetiresaver.com