SPARE TIRE SAVER
STANDARD SERIES - BLACK MAX SERIES
SPARE TIRE THEFT PROTECTION
Lower the spare tire for access to the frame cross-member and winch mechanism. The winch mechanism is attached to the frame cross-member with four mounting bolts. Looking upward at the winch mechanism, locate the the threaded ends of the four mounting bolts and the three nearby (approx.5/8" dia.) holes stamped in the cross-member.
Use the most forward hole stamped in the cross-member on the left(drivers) side to attach the U-bracket as shown. Attach the U-bracket using the provided 3/8" x 1" bolt, locknut and two flat washers. One washer is placed inside the U-bracket and the other is placed under the locknut on top of the cross-member. Position the U-bracket as shown, with the grooved end of the lock bar facing toward the front of the vehicle. Install the crimp-ring retainer in the groove and crimp closed with pliers.
Raise the spare tire and guide the lower end of the locking bar down through one of two lug bolt holes unobstructed by the mounting plate, attached to the end of the winch cable. Prevent rotation of the spare tire to insure that the locking bar remains in a vertical position, as it extends downward through the lug bolt hole.
This Lock Is Designed To Install With Spare Tire In The Original Factory Position, Valve Stem Up
STANDARD SERIES LOCKING INSTRUCTIONS:
The PVC bar cover/seal is designed to center and hold the lock against the tapered surface of the lug hole. Hold lock inverted with the PVC cover/seal end up. Place lock over the end of the lock bar. Slide lock upward against the tapered surface of the lug hole and rotate to engage lock mechanism with the lock bar groove.
BLACK MAX SERIES LOCKING INSTRUCTIONS:
(1) Remove the key from the lock cylinder.(2)
Place the Black Max lock assembly over the end of the lock bar with the bar cover/seal end up. (3)Slide the lock assembly upward until the cover/seal makes contact with the tapered surface of the lug hole. (4)Press in on the "Push To Lock" button with the lock assembly still against the surface of the wheel, to engage the deadbolt lock mechanism with the groove in the locking bar.
RECORD KEY CODE NUMBER FOR FUTURE REFERENCE
Lubricate Grease Fitting Once a Year To Validate LIMITED LIFETIME CORROSION WARRANTY
DO NOT Use Lithium Base Lubricants
UNITED STATES PATENTS
4794771 - D399122 - 6505488
Back||Main Page||email||Order Form