SPARE TIRE SAVER
STANDARD SERIES - BLACK MAX SERIES
SPARE TIRE THEFT PROTECTION
COLORADO / CANYON PICKUPS
Lower spare tire for access to the winch mechanism. Remove and discard the single winch mechanism mounting bolt. NOTE: The spare tire must be supported or removed from the winch cable before the mounting bolt is removed.
Using the provided 10mm x 50mm hex head bolt and aluminum spacer to attach the U-bracket to the mounting flange of the winch mechanism. Position the U-bracket as shown in picture at right and tighten mounting bolt.
Install lock bar through the holes in both legs of the U-bracket, with grooved end facing toward the winch mechanism, as shown above. Place the clip-ring retainer in the bar groove and crimp closed with pliers.
Raise the spare tire while guiding the lower end of the lock bar down through the lug hole least obstructed by the mounting plate attached to the winch cable in the center of the wheel, as shown in picture above.
STANDARD SERIES LOCKING INSTRUCTIONS:
The PVC bar cover/seal is designed to center and hold the lock against the tapered surface of the lug hole. Hold lock inverted with the PVC cover/seal end up. Place lock over the end of the lock bar. Slide lock upward against the tapered surface of the lug hole and rotate to engage lock mechanism with the lock bar groove.|
BLACK MAX SERIES LOCKING INSTRUCTIONS: (1) Remove the key from the lock cylinder.(2) Place the Black Max lock assembly over the end of the lock bar with the bar cover/seal end up. (3)Slide the lock assembly upward until the cover/seal makes contact with the tapered surface of the lug hole. (4)Press in on the "Push To Lock" button with the lock assembly still against the surface of the wheel, to engage the deadbolt lock mechanism with the groove in the locking bar.
Lubricate Grease Fitting Once A Year To Validate Limited Lifetime Corrosion Warranty
DO NOT Use Lithium Base Lubricants
UNITED STATES PATENTS
4794771 - D399122 - 6505488
Back||Main Page||email||Order Form