SPARE TIRE SAVER
STANDARD SERIES - BLACK MAX SERIES
SPARE TIRE THEFT PROTECTION
SILVERADO - SIERRA - AVALANCHE PICKUPS
TAHOE - SUBURBAN - YUKON - ESCALADE SUV
Lower spare tire for access to the winch mechanism. Locate the vertical slot on the left (drivers) side of the winch mechanism. Use the small opening at the top of the slot to insert the 5/16" carriage head bolt, as shown in picture at left.
Use the provided washer and locknut to attach the U-bracket to the winch mechanism. Position the U-bracket as shown in picture and tighten locknut.
Install lock bar through the holes in both legs of the U-bracket, with grooved end facing toward the rear of the vehicle. Place the retainer clip in the bar groove and crimp closed with pliers.
Raise the spare tire while guiding the lower end of the lock bar through the lug hole least obstructed by the mounting plate attached to the winch cable in the center of the wheel.
STANDARD SERIES LOCKING INSTRUCTIONS:
The PVC bar cover/seal is designed to center and hold the lock against the tapered surface of the lug hole. Hold lock inverted with the PVC cover/seal end up. Place lock over the end of the lock bar. Slide lock upward against the tapered surface of the lug hole and rotate to engage lock mechanism with the lock bar groove.|
BLACK MAX SERIES LOCKING INSTRUCTIONS: (1) Remove the key from the lock cylinder.(2) Place the Black Max lock assembly over the end of the lock bar with the bar cover/seal end up. (3)Slide the lock assembly upward until the cover/seal makes contact with the tapered surface of the lug hole. (4)Press in on the "Push To Lock" button with the lock assembly still against the surface of the wheel, to engage the deadbolt lock mechanism with the groove in the locking bar.
Lubricate Grease Fitting Once A Year To Validate Limited Lifetime Corrosion Warranty
DO NOT Use Lithium Base Lubricants
UNITED STATES PATENTS
4794771 - D399122 - 6505488