Make your own free website on Tripod.com

WinchLock
STANDARD SERIES - HIGH SECURITY

SPARE TIRE THEFT PROTECTION

TOYOTA
4-RUNNER SUV
1995-2002

INSTALLATION INSTRUCTIONS


STEP ONE Lower the spare tire for access to winch mechanism and frame cross-member. Note that winch mechanism is mounted to the inside of the C-channel frame cross-member. Locate the stamped 5/8 x 7/8 oblong hole in the vertical side of the cross-member located between the left side of the winch mechanism and spare tire support bracket.


STEP TWO Place the 3/8 x 1 hex head bolt through the 3/8 center hole in the U-bracket. Attach the U-bracket to the frame cross- member using the provided locknut and flat washer. Position U-racket as shown, with the open sides aligned vertically.


STEP THREE Install the lock bar through the holes in both legs of the U-bracket, with the grooved end facing toward the left side frame rail. Place the crimp-ring retainer in the groove and crimp closed with pliers.

STEP FOUR Raise the spare tire while guiding the lower end of lock bar through the lug hole the least obstructed by the winch cable retaining plate in the center of the wheel. The lock bar must remain vertical as spare tire is returned to the full up/stored position.

This Lock Is Designed To Install With The Spare Tire In The Original Factory Position With The Valve Stem Up.

STEP FIVE The PVC lock bar cover/seal is designed to center and hold the lock firmly against the tapered surface of the lug hole. Hold lock inverted with the PVC cover/seal end up. Place lock over the end of the lock bar. Slide lock upward against the tapered surface of the lug hole and rotate to engage lock mechanism with the lock bar groove.


RECORD KEY CODE NUMBER FOR FUTURE REFERENCE



Lubricate Grease Fitting Once A Year To Validate LIMITED LIFETIME CORROSION WARRANTY
DO NOT Use Lithium Base Lubricants


UNITED STATES PATENTS
4794771 - D399122 - 6505488

Back| |Main Page

800/843-5701

www.motivelocks.com