-->
Make your own free website on Tripod.com

WinchLock
STANDARD SERIES - HIGH SECURITY

SPARE TIRE THEFT PROTECTION

NISSAN

FRONTIER PICKUP / XTERRA SUV
1999-UP

INSTALLATION INSTRUCTIONS


STEP ONE Lower spare tire for access to the frame cross-member. Locate the two hex head mounting bolts used to attach the fuel vapor canister mounting plate to the top side of the cross-member. Both mounting bolts are located to right center of the winch mechanism.

STEP TWO Use a 12mm socket to remove the fuel canister mounting bolt, as indicated by the picture in the picture at right. Reuse the mounting bolt and the provided flat washer to install the U-bracket, as shown in the picture at right. Install the lock bar through the holes in both legs of the U-bracket, with the grooved end facing toward the right side frame rail. Place the crimp-ring retainer in the groove and crimp closed with pliers.

STEP THREE Raise the spare tire while guiding the lower end of the lock bar down through the lug hole least obstructed by the tire mounting plate attached to the winch chain.

This Lock Is Designed To Install With Spare Tire In The Factory Installed Position, Valve Stem Up.

STEP FOUR The Pvc lock bar cover/seal is designed to center and hold the lock firmly against the tapered surface of the lug hole. Hold lock inverted with the PVC cover/seal end up. Place lock over the end of the lock bar. Slide lock upward against the tapered surface of the lug hole and rotate to engage lock mechanismwith the lock bar groove.

RECORD KEY CODE NUMBER FOR FUTURE REFERENCE


Lubricate Grease Fitting Once A Year To Validate Limited Lifetime Corrosion Warranty
DO NOT Use Lithium Base Lubricants


UNITED STATES PATENTS
4794771 - D399122 - 6505488

Back| |Main Page

800/843-5701

www.motivelocks.com