WinchLock
STANDARD SERIES - HIGH SECURITY

SPARE TIRE THEFT PROTECTION

DODGE

RAM 1500 SERIES PICKUPS
1994-1999

INSTALLATION INSTRUCTIONS


STEP ONE
Lower spare tire for access to winch mechanism and winch tube.
STEP TWO
Place the U-shaped bracket over the winch tube, with the round hole in the bracket leg facing toward the right side the truck. Hold the lock bar horizontal and let the flat machined end engage the round hole in the bracket. Rotate the lock bar until the flat machined end is aligned with the flat sided hole in the opposite leg of the bracket and then pushing the end of bar through flat sided hole and letting the lock bar swing downward to a vertical position which will lock the end of the bar into the U-shaped bracket.
STEP THREE
Raise the spare tire while guiding lower end of the lock bar through the lug hole least obstructed by the winch cable mounting plate in the center of the wheel. Prevent spare tire from rotating to insure that the lock bar remains vertical as spare tire is returned to the full up/stored position.

This Lock Is Designed To Install With The Spare Tire In The Original Factory Position, Valve Stem Down.

STEP FOUR
The PVC bar cover/seal is designed to center and hold the lock firmly against the tapered surface of the lug hole. Hold lock inverted with the PVC cover/seal end up. Place lock over end of the lock bar. Slide lock upward against the tapered surface of the lug hole and rotate to engage lock mechanism with the lock bar groove.

RECORD KEY CODE NUMBER FOR FUTURE REERENCE


Lubricate Grease Fitting Once a Year To Validate LIMITED LIFETIME CORROSION WARRANTY
DO NOT Use Lithium Base Lubricants


UNITED STATES PATENTS
4794771 - D399122 - 6505488

BACK| |MAIN PAGE

800/843-5701

www.motivelocks.com

Make your own free website on Tripod.com