BLACK MAX SERIES - MAXIMUM SECURITY
SPARE TIRE THEFT PROTECTION
TUNDRA PICKUP 99-Up
Use the most forward hole stamped in the cross-member on the left(drivers) side to attach the U-bracket as shown. Attach the U-bracket using the provided 3/8" x 1" bolt, locknut and two flat washers. One washer is placed inside the U-bracket and the other is placed under the locknut on the top side of the cross-member. Install the U-bracket as shown, with the lock bar through the holes in both legs of the U-bracket and the grooved end facing toward the front of the vehicle. Place crimp-ring retainer in groove and crimp closed with pliers.
SPECIAL BLACK MAX LOCKING INSTRUCTIONS:
(1)Remove the key from the lock cylinder. (2)Place the Black Max lock assembly over the end of the locking bar with the bar cover/seal end up. (3)Slide the lock assembly upward until the bar cover/seal is compressed against the tapered surface of the lug hole. (4)Press inward on the "Push To Lock" button while holding the lock assembly against the wheel to engage the dead bolt lock mechanism with the locking bar groove.
UNITED STATES PATENTS
4794771 - D399122 - 6505488