-->
Make your own free website on Tripod.com

WinchLock II
BLACK MAX SERIES - MAXIMUM SECURITY

SPARE TIRE THEFT PROTECTION

NISSAN

FRONTIER PICKUP / XTERRA SUV
1999-UP

INSTALLATION INSTRUCTIONS


STEP ONE Lower spare tire for access to the frame cross-member. Locate the two hex head mounting bolts used to attach the fuel vapor canister mounting plate to the top side of the cross-member. Both mounting bolts are located to right center of the winch mechanism.

STEP TWO Use a 12mm socket to remove the fuel canister mounting bolt, as indicated by the picture in the picture at right. Reuse the mounting bolt and the provided flat washer to install the U-bracket, as shown in the picture at right. Install the lock bar through the holes in both legs of the U-bracket with the grooved end facing toward the right frame rail. Place the crimp-ring retainer in the groove and crimp closed with pliers.

STEP THREE Raise the spare tire while guiding the lower end of the lock bar down through the lug hole least obstructed by the tire mounting plate attached to the winch chain.

This Lock Is Designed To Install With Spare Tire In The Factory Installed Position, Valve Stem Up.

BLACK MAX LOCKING INSTRUCTIONS (1) Remove the key from the lock cylinder. (2)Place the BLACK MAX lock assembly over the end of the lock bar with the bar cover/seal end up. (3) Slide the lock upward on the bar until the bar cover/seal is compressed in the tapered surface of the lug hole. (4) Press inward on the "Push To Lock" button while holding the lock assembly firmly against the wheel to engage the deadbolt lock mechanism with the lock bar groove.

RECORD KEY CODE NUMBER FOR FUTURE REFERENCE


Lubricate Grease Fitting Once A Year To Validate Limited Lifetime Corrosion Warranty
DO NOT Use Lithium Base Lubricants


UNITED STATES PATENTS
4794771 - D399122 - 6505488

Back| |Main Page

800/843-5701

www.motivelocks.com