Make your own free website on Tripod.com

WinchLock II
BLACK MAX SERIES - MAXIMUM SECURITY

SPARE TIRE THEFT PROTECTION

CHEVROLET-GMC

EXPRESS VAN - SAVANA VAN
2003-UP

INSTALLATION INSTRUCTIONS


STEP ONE Lower spare tire for access to the winch mechanism. Locate the vertical slots on both sides of the winch mechanism. The U-bracket can be installed using the slot on either side of the winch mechanism. Use the small opening at the top of the slot to insert the 5/16" carriage head bolt, as shown at left.
STEP TWO Use the provided washer and locknut to attach the U-bracket to the winch mechanism. The U-bracket is installed as shown. Slide the U-bracket and mounting bolt upward in the slot until the top edge of the bracket is 3/4" from the cross-member and tighten locknut.


STEP THREE Install the lock bar through the holes in both legs of the U-bracket, with the grooved end facing toward the rear of the vehicle. Place the crimp-ring retainer in the groove and crimp closed with pliers.

STEP FOUR Raise the spare tire while guiding the lower end of the lock bar down through the lug hole least obstructed by the mounting plate attached to the winch cable in the center of the wheel.

This Lock Is Designed To Install With Spare Tire In The Factory Installed Position, Valve Stem Down.

BLACK MAX LOCKING INSTRUCTIONS (1) Remove the key from the lock cylinder. (2)Place the BLACK MAX lock assembly over the end of the locking bar with the bar cover/seal end up. (3) Slide the lock upward on the bar until the bar cover/seal is compressed in the tapered surface of the lug hole. (4) Press inward on the "Push To Lock" button while holding the lock assembly firmly against the wheel to engage the deadbolt lock mechanism with the locking bar groove.

RECORD KEY CODE NUMBER FOR FUTURE REFERENCE


Lubricate Grease Fitting Once A Year To Validate Limited Lifetime Corrosion Warranty
DO NOT Use Lithium Base Lubricants


UNITED STATES PATENTS
4794771 - D399122 - 6505488

Back| |Main Page

800/843-5701
www.motivelocks.com