Make your own free website on Tripod.com

WinchLock II
BLACK MAX SERIES - MAXIMUM SECURITY

SPARE TIRE THEFT PROTECTION

CHEVROLET-GMC

COLORADO / CANYON PICKUPS
2004-UP

INSTALLATION INSTRUCTIONS


STEP ONE
Lower spare tire for access to the winch mechanism. Remove and discard the single winch mechanism mounting bolt. NOTE: The spare tire must be supported or removed from the winch cable before the mounting bolt is removed.
STEP TWO
Using the provided 10mm x 50mm hex head bolt and aluminum spacer to attach the U-bracket to the mounting flange of the winch mechanism. Position the U-bracket as shown in picture at right and tighten mounting bolt.
STEP THREE
Install the lock bar through the holes in both legs of the U-bracket, as shown above, with grooved end facing toward the winch mechanism. Place the clip-ring retainer in the groove and crimp closed with pliers.

STEP FOUR
Raise the spare tire while guiding the lower end of the lock bar down through the lug hole least obstructed by the mounting plate attached to the winch cable in the center of the wheel, as shown in picture above.

Aluminum Alloy Wheel: Pull bar away from the side wall of the recessed lug hole to obtain needed clearance for lock, as the wheel is returned to the full up/stored position. The extra bar seal included in the hardware package is used as a spacer and installs over the end of the existing bar seal pre-installed on the lock assembly. The spacer is used only with the optional aluminum alloy wheel.

This Lock Is Designed To Install With Spare Tire In The Factory Installed Position, Valve Stem Down.

BLACK MAX LOCKING INSTRUCTIONS
(1) Remove the key from the lock cylinder. (2)Place the BLACK MAX lock assembly over the end of the locking bar with the bar cover/seal end up. (3) Slide the lock upward on the bar until the bar cover/seal is compressed in the tapered surface of the lug hole. (4) Press inward on the "Push To Lock" button while holding the lock assembly firmly against the wheel to engage the deadbolt lock mechanism with the locking bar groove.

RECORD KEY CODE NUMBER FOR FUTURE REFERENCE


Lubricate Grease Fitting Once A Year To Validate Limited Lifetime Corrosion Warranty
DO NOT Use Lithium Base Lubricants


UNITED STATES PATENTS
4794771 - D399122 - 6505488

Back| |Main Page

800/843-5701

www.motivelocks.com