CHEVROLET SIVERADO / GMC SIERRA
PART# LH 003
PLEASE READ INSTRUCTIONS BEFORE ATTEMPTING INSTALLATION
TOOLS NEEDED = 13mm Wrench or Socket
Remove factory tailgate bezel by pushing down on the top surface and then pulling outward. Push upward on the bottom and remove bezel from the tailgate panel.
- Use a 13mm wrench to remove the bolt on the lower portion of the bolt pattern triangle on the cargo side of tailgate panel.
- Insert the key in the lock cylinder of the tailgate lock. Hold the tailgate lock assembly by the key and position it into the tailgate cavity. Align the lock mounting bracket over the mounting hole in the tailgate. Hold the lock firmly in place and install the bolt through the mounting holes in both brackets and tighten. Recheck the installation to make sure the lock can be locked and unlocked without binding before proceeding to the next step.
- Install the tailgate lock bezel by inserting the lower half of the bezel first and then pushing the upper half in place. This procedure must be followed exactly or damage to the bezel will result.
IMPORTANT: The lock bezel installation is permanent and cannot be removed without damage to the tailgate painted surface and / or bezel.
- Recheck operation of the tailgate lock to complete the installation.
Retain Key Code Tag Located On Key Ring In A Safe Place For Future Reference.
Car Dealer Page||email