Make your own free website on Tripod.com
THEFT PROTECTION

CAR DEALER
SECURITY STORE

TAILGATE LOCK


INSTALLATION INSTRUCTIONS

CHEVROLET/GMC C/K PICKUPS
1988-1999

PART# LH 002


PLEASE READ INSTRUCTIONS BEFORE ATTEMPTING INSTALLATION

TOOLS NEEDED = 4mm Torx Drive Wrench.
  1. REMOVING THE FACTORY BEZEL: Push down and pull outward on the upper half of the plastic bezel. Push upward on the lower half of the bezel and remove.

  2. On the cargo side of the tailgate, loosen and remove the Torx drive bolt on lower portion of the bolt pattern triangle.

  3. INSTALLING THE TAILGATE LOCK ASSEMBLY: Insert the key in the lock cylinder. Hold the lock assembly by the key and insert into the tailgate cavity. Align the lock mounting bracket over the mounting hole in the tailgate. Hold the lock assembly firmly in place and install the mounting bolt through the both brackets and tighten the mounting bolt.

  4. Install the tailgate lock bezel by inserting the lower half of the bezel first and then pushing the upper half in place.

    WARNING
    Failure to follow the installation procedure as detailed above may result in damage to the lock bezel.

    IMPORTANT: The lock bezel installation is permanent and cannot be removed without damage to the tailgate painted surface and / or bezel.

  5. Recheck operation of the tailgate lock to complete the installation.

Retain Key Code Tag Located On Key Ring In A Safe Place For Future Reference.


Back || Car Dealer Page||email


CALL

TO ORDER

800/843-5701

www.motivelocks.com