Make your own free website on Tripod.com
THEFT PROTECTION

CAR DEALER
SECURITY STORE

TAILGATE LOCK


INSTALLATION INSTRUCTIONS

FORD F150 / 250
1987-1996

PART# LH 004

PLEASE READ INSTRUCTIONS BEFORE ATTEMPTING INSTALLATION


TOOLS NEEDED = 3mm Torx Drive Wrench and/or 10 mm Socket.

  1. Remove access panel on cargo side of tailgate by removing all 12 screws, using the 3mm Torx drive wrench. This will provide access to the tailgate handle assembly mounted inside.

  2. Remove both 10mm nuts used to mount the factory tailgate handle to the tailgate assembly and remove handle.

  3. Install the tailgate lock assembly by aligning the holes in the lock assembly with the holes used to mount the original factory handle. Reinstall using the original mounting nuts.

  4. Install the lock bezel by first inserting the lower half of the bezel into the tailgate opening and then pushing the upper half in place.

    IMPORTANT

    Installation of the lock bezel is permanent and cannot be removed without damage to the tailgate surface and / or bezel.

  5. Check the lock / unlock operation of the tailgate lock. NOTE: Key can can only be removed when the handle is locked.

  6. Reinstall the access panel. The installation is now complete.


Retain Key Code Tag Located On Key Ring In A Safe Place For Future Reference.


Back||Car Dealer Page||email

Call

TO ORDER

800/843-5701

www.motivelocks.com